¶ DMA Firmware Installation Guide
¶ 🌟 Premium DMA Firmware Solutions
Experience unmatched performance with our industry-leading firmware:
- ✓ Full compatibility with ALL major anti-cheat systems
- ✓ Superior stability and performance
- ✓ Professional support team
- ✓ Regular updates included
This guide will walk you through the process of installing firmware on your DMA device.
¶ Prerequisites
- Administrator access to your PC
- DMA device (xc7a35t, xc7a75t, or xc7a100t model)
-
Installation package containing:
- CH347 FPGA Download Tool
- Firmware binary file (.bin)
¶ Installation Steps
¶ 1. Firmware Tool Setup
- Locate
CH347FPGATool\CH347FpgaDownloadTool.exe - Right-click and select "Run as Administrator"
-
In the tool interface:
-
Select your FPGA model:
xc7a35t,xc7a75t, orxc7a100t - Set file type to
BIN
-
Select your FPGA model:
¶ 2. Firmware Installation
- Click "Browse" and select your firmware .bin file
-
Click the
下载(Download) button to begin the installation process
- Wait for the installation to complete
¶ 3. Post-Installation & Verification
- Restart your computer twice
-
Verify installation by running the DMA Speed Test
- A successful installation will display the device's speed during the test
-
Verify device in Device Manager:
- Open Device Manager on your main computer
- Look for the emulated device entry
-
Driver installation:
- Some firmware versions will install drivers automatically
- If manual installation is required, use the driver provided with your firmware .bin file
- If you see a yellow exclamation mark (!) and no driver was included with your purchase, please contact our support team immediately
Important: The flashing process should take 30-60 seconds to complete.
If the process completes in less than 10 seconds, verify the following:
- You selected the correct board type
-
The appropriate USB driver is installed:
- CH347 driver for options 1-3
- FTDI driver for options 4-5
- The USB cable is properly connected
- The device is properly seated in the PCI slot
- The device is powered on and the kill switch is OFF
¶ Next Steps
After successful firmware installation:
- Reboot both computers
- Visit umbraredux.net to:
- Download our loader software
- Activate your firmware
- Access detailed setup instructions
- Get the latest firmware updates
Need Help?
- Website: umbraredux.net
- Discord: _shifty1337
- WeChat: shifty1337